OWNER’S MANUAL
Sears Peyton Side Table
Product Code: D71 M80903
UPC Code: 7-22938-07947-6
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
866-391-4868
8am-5pm (EST), Monday-Friday.
View the expanded assortment of outdoor living product on-line at
WWW.lazboyoutdoor.com and WWW.sears.com
.
Page 1 of 5
CAUTION: Read all the instruction before assembly.
Failure to do so may result in faulty assembly and potential injury!
Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging
the item. Seek assistance to assemble bulky or heavy items.
After final alignment, make sure all bolts, nuts and nut covers are securely tightened.
Assembly Instruction:
Note: 1. DO NOT tighten completely until all bolts are in place.
2. Paint Not provided with all furniture.
PARTS LIST
Item
Part Name
Picture
Qty
A
Table Rim
1
B
C
Table Leg
4
1
Leg Connector
M6x15mm Hex Head
Bolt
D
E
12
12
M6 Washer
F
Bolt Cap
12
1
Hex Wrench
G
H
Ceramic Tile
1
Page 3 of 5
Assembly Steps:
Step1: Turn the table rim (A) upside down on a soft, non-abrasive surface carefully.(See Figure 1)
Figure 1
Step2: Attach the table legs (B) to table rim (A) with M6 x 15mm hex head bolt (D), M6 washer (E).
(See Figure 2)
Figure 2
Step3: Attach the leg connector (C) to table legs (B) with M6 x 15mm hex head bolt (D), M6 washer
(E). Tighten all bolts with hex wrench (G). Cover all the bolts with bolt caps (F) (See Figure 3)
Figure3
Page 4 of 5
Step 4: Then turn your table right side up. (See Figure 4)
Figure 4
Step 4: Place ceramic tile (H) on the table rim. (See Figure 5)
Figure5
Now your table is ready for your enjoyment!
Page 5 of 5
|